The concrete floor scabbler is commonly used in cast-in-place concrete structures to prepare the surface before pouring the next layer. Its purpose is to ensure a strong bond between layers. This machine is also known as a floor scarifier. It helps minimize damage to the structure and prevents water infiltration. Concrete floor scabblers are widely used for removing concrete and are popular in various applications. Contact us now to inquire about the price of a concrete floor scabbler.
Hand-Held Concrete Floor Scabbler
The hand-held concrete floor scabbler has a small size and lightweight, it is cheaper than the hand-push machine. The chiseling head is made of high-quality tungsten steel alloy with high hardness. Excellent quality hand-held concrete scrabbler is mainly used for a small area, and will not cause damage to the original structure. Therefore, it is generally used in the construction of bridge engineering. Click the button, you can check the price of our concrete floor scabbler for sale.
The hand-push concrete scabbling machine is a pneumatic tool, is also called a pneumatic scrabbler. The has a small size and heavy body. Each working head hammers the ground 2,200 times per minute. The surface of the concrete forms a pockmark, but it does not affect the structure. For large-area roads, the hand-push air scrabbler is the ideal tool. It is used for various types of building reinforcement and scabbling in reservoirs, dam seepage, power plants, highways, railways, tunnels, culverts, etc.
Applications :
Chiseling the smooth surface and anti-slip layer of concrete pavement or marble floors, increase adhesion.
The multi-angled chiseling of highways, railway bridges, and culverts increases the adhesion between new and old joints.
The chiseling operation of nuclear industry reactors.
Removing the tire footprint on the airport runway, improving the friction.
Removing the weathering and carbonization layer of the dock concrete dam for concrete pouring and secondary reinforcement.
Removing rust paint and other chemical stains on offshore platforms, decks, hulls.
Roughing, leveling, and pretreatment in various reinforcement projects.
Remove floor coatings, paint, and various traffic markings.
Concrete Floor Scabbling MachineFloor Scabbler for Sale
Concrete Scabbler Machine of working principle
The concrete floor machine has the functions of milling and chiseling. No air compressor, pure electric. The machine is easy to operate and the work efficiency is very high, which is favored by users at home and abroad. The chiseling and milling machine can be used for the concrete layer of the expressway, high-speed rail, bridge deck, and box girder; the concrete surface of the building and municipal engineering is chiseled, repaired, refurbished, and re-reinforced. If the indoor floor is raised, it can also be used to mill out the upper part, as well as the anti-slip treatment of marble granite.
The electric scabbling machine has the following features: simple and flexible control, free walking, wide working surface, significant chiseling efficiency, its main innovation is to save the cost of air compressors in the case of power, it is an ideal choice for current large-scale chiseling project.
Operation of Concrete Floor Scabbler
Must add 8-10KG gear oil to the new machine.
Access 380V power supply must have a corresponding matching leakage protection device.
Before starting the machine, it must be ensured that no one is within 3 meters in front of the machine and in the left and right direction.
The red indicator light is on after connecting the power, open the leakage protection switch in the distribution box, then activate the green button switch, the machine starts to work normally, and it needs to swing forward and backward.
During the working process, the six alloy rollers must keep rotating. If one of them does not rotate, it must be stopped, clean the dust inside, and the butter should be freshly applied to make it rotate. The bearing is found to be unusable and needs to be replaced immediately.
The concrete floor scabbler has several chisel heads, each carbide bits can hammer concrete surfaces. The machine operates by thumping a number of tipped rods down onto the concrete surface in rapid succession. It takes several hits can achieve the desired depth. It is mainly used for scabbling and reinforcement of various types of buildings, such as reservoirs, bridges, power plants, highways, tunnel, etc.
