At present, many manufacturers of electrostatic backpack sprayer have uneven quality. How to buy high-quality backpack electrostatic sprayers has also become a major problem for buyers.  First of all, the key components to judge the quality and performance of the electrostatic disinfectant sprayer for sale are the water pump and whether it can produce electrostatic effects.

The core component of the electrostatic disinfectant sprayer for sale is the water pump. The electrostatic backpack sprayer generally uses a piston pump. The working principle of the piston pump is that the motor drives a set of transmission devices to push the piston to reciprocate and pump the medicine into the pressure pot. The work is stable and reliable, the pressure is large, but the design is complicated, the noise is large, and the energy conversion rate is low.

Request A Quote

The unique singular effect of the electrostatic backpack sprayer lies in its remarkable electrostatic environmental protection adsorption effect. Electrostatic technology is mainly used to establish an electrostatic field in the spray nozzle in the local area of ​​the spray. The liquid medicine will form a group of charged droplets after the nozzle is silent. Under the action of the electrostatic field, the fine droplets are combined with bacteria and viruses to achieve the killing effect.

YG Machinery can provide you with various styles of disinfection and epidemic prevention equipment, such as: fogging sanitizer machine, fog sprayer machine, air disinfection machine, car disinfection fogging machine, disinfection door, blu ray anion nano spray gun, etc. To learn more, please click the message box below or add my WhatsApp+8613598866720 or send an email to admin@ygroadmachine.com.

Request A Quote

Common Electrostatic Backpack Sprayer Failures and Troubleshooting Methods

1. Insufficient spray pressure and poor atomization: If the water inlet ball valve is set up by dirt, you can remove the water inlet valve and clean the dirt with a cloth; if the cup is damaged, you can replace it with a new one; if it is due to the connection part If the sealing ring is not installed, or the air is leaking due to the damage of the sealing ring, the sealing ring can be installed or replaced.
2. No fogging:
3. If the oblique hole of the nozzle body is blocked by dirt, the oblique hole can be cleared; if the nozzle is blocked, the nozzle can be removed and cleaned. However, hard objects such as iron wire or copper needle can not be used to poke the nozzle to prevent The expansion of the holes makes the spray quality worse; if the filter in the casing is blocked or the water valve ball is set up, clean the filter and clean the dirt that has set up the ball.
4. The switch leaks or cannot be screwed: if the switch cap is not tightened, the switch cap should be tightened; if the gasket on the switch core is worn out, the washer should be replaced; the switch cannot be screwed because it has been placed for a long time or used for a long time, the switch core is stuck due to the corrosion of the agent. The parts should be removed and cleaned in kerosene or diesel; if it is difficult to remove, it can be soaked in kerosene for a period of time, and then it can be removed after disassembly. Do not hit with hard objects.
5. Water leakage in each connection part: if the joint is loose, the nut should be tightened; if the washer is not flat or damaged, the washer should be leveled or replaced; if the washer shrinks and hardens, it can be soaked in animal oil reuse.