RMC Plant(Ready Mix Concrete) is used for producing concrete for the construction site. The concrete batching plant is mainly composed of five major systems and other auxiliary facilities including the mixing host, the material weighing system, the material conveying system, the material storage system, and the control system.
The theoretical productivity of a concrete batching plant is 90m3/h, also known as 1.5 square batching plants. The main principle of its work is to use cement as the cementing material, mix and stir the raw materials such as sand, lime, cinder, etc., and finally make it into concrete, which is put into construction and production as a wall material.
YG Ready Mix Concrete Batching Plant Parameters
Below are the technical parameters of the HZS 90 and HZS 12O mixer plant:
The material storage system can store the raw material. The number of storage hoppers depends on the types of raw materials. In general, we use four types of raw materials: cement, water, aggregate, and admixture. Then, the material weighing system will weigh all the raw materials according to your settings. The control room is used to control the whole production process with the automatic control system. After that, the material conveying system will deliver the materials to the mixer. The concrete mixer starts working.
The mixed concrete will be delivered to the construction site by the concrete mixer truck or concrete pump. Due to the high efficiency and automaticity of the rmc plant, the mixer plant can produce the ready-mix concrete with high productivity.
The batching and mixing of concrete is stable and fast.
The performance label of the construction concrete: It determines the kind of mixing host used. Such as in water conservancy projects, the forced mixing host must be selected. In addition, the batching station and storage bin should be selected according to the type of concrete material that can be mixed.
The task volume and construction period of concrete construction: These two parameters determine the size of the batching plant. The transportation status of the finished concrete should also be considered in the selection. Such as direct pumping or vehicle delivery. The volume of the conveying vehicle is also an important basis for determining the model of the batching plant.
Construction environment and construction objects: When choosing to purchase a concrete mixing plant, the influence of construction objects and construction environment should be fully considered, so as to ensure smooth construction and construction quality.
When the construction site needs a large amount of pouring at one time, and there is no mixing station that can be reinforced nearby. It is better to choose two mixing stations with smaller specifications or choose a main and a pair of two-machine preparation.
When the traffic on the construction site is inconvenient and it takes a lot of time for maintenance personnel to enter and leave the construction site, it is better to choose a double station of the same smaller size or prepare enough spare parts to ensure the smooth progress of the construction.
When the construction sites are scattered, but the distance between the construction sites is not too far, the conveying radius of the concrete mixer truck should not exceed half an hour’s drive, and the dump truck should not exceed 10 minutes drive. It is best to use multiple workers for centralized mixing to improve the utilization rate of the mixing station and the economic benefits of construction.
The operators: Generally speaking, the structure of small batching plants is relatively simple, and the control system is relatively simple, so the requirements for operation and maintenance personnel are lower. The larger stations are complex in structure and have a high degree of automation, so the requirements for operators are also higher. Therefore, in addition to the previous factors, you should also consider this factor when purchasing a batching plant.
Preparation selection: In general, the manufacturer has mature product preparation, such as specifications, quantity, variety, etc. You can make your special request when ordering the product. We will try our best to accommodate your request. However, when purchasing a concrete batching plant, avoid being greedy for perfection, which will cause unnecessary waste in the economy. In addition, when purchasing products, in addition to referring to the prices of different manufacturers, special attention should be paid to the preparation lists of different manufacturers. In addition to the above specifications, varieties, and quantities, the most important thing is the manufacturer of the accessories.
In summary, you can always choose the most suitable model for you. When choosing a concrete batching plant, do not pursue the best, but pursue the most suitable and meet your needs, because such a choice is the most economical and effective.
concrete mixing plant
Concrete batching plant manufacturer
Henan Yugong Machinery Co., Ltd. (YG Machinery) is one of the TOP construction machines manufacturers in China. We produce concrete batching plants, concrete mixers, stabilized soil mixing stations, and other construction machinery products. YG Machinery has a spacious production workshop, advanced equipment, strong technical force, and perfect testing methods. Its products are in a leading position in the same industry. It has become a designated manufacturer of the China Construction Machinery Association and a key enterprise in the production of concrete mixing plants in our province.
While ensuring the quality of the 90 batching plants, YG Machinery can give customers a discount. We will never do anything that will damage the reputation due to the price reduction or simple configuration! The company has preferential policies for 90 batching plants. Long-term customers and bulk purchase customers have more preferential treatment. For detailed preferential information, please contact us for consultation. Send a message to WhatsApp at +8613598866720 to get the Mixing station price.
