Power trowel machine is also called cement polishing machine. The concrete power trowel machine can polish the cement pavement after a defined pre-curing time, it has a power trowel to give the concrete smooth surface. Its main structure is a trowel rotor driven by gasoline engine, four trowels are installed on the bottom of the cross in the middle of the rotor. The tilting direction of the spatula coincides with the direction of rotation of the rotor, and the V-belt is driven by the gasoline engine to rotate the spatula rotor.
Parameter of Power Trowel for Sale:
|Blade Size||350*150 mm|
Parameter of Ride on Power Trowel for Sale:
|Engine||Lifan 2V78(24HP) or Honda GX 690(24HP)|
The ride on troweling machine is equipped with double troweling plate, which increases its own weight and working area. The driving effect is obviously higher than walk-behind trowel, which has better compaction effect on the ground. The ride on trowel machine can greatly reduce the labor intensity, improve the work efficiency.
- Equipped with large horsepower engine, quality assurance, superior performance, providing strong and reliable power.
- Large-module design of the gearbox, aluminum alloy box, maintenance-free, long service life.
- Trowel blade support armadopts strict heat treatment super large diameter carbon structural steel, has high strength.
- The scientifically centrifugal clutch transmission mechanism design has large transmission torque, long service life and convenient maintenance.
- Mechanical steering, flexible operating system, easy to operate, hasvariable gear.
- The control screw can adjust blade angle.
- Equipped with a large-capacity water tank, hasan independent sprinkler system to ensure the quality of the construction.
- Equipped with LED lighting, the work can be continuingeven at night.
- Walking wheels can be raised and lowered, easy to change the smear and walkfor machine.
- Safety cut-off switch can quickly shut down the engine to ensure safety.
- Low center of gravity design makes the machine run smoothly and flexibly.
- The sprayed power trowel surface is beautiful, rust and corrosion resistance.
How to Operate Power Trowel?
Concrete trowels are ideal for roughing and fine grinding on concrete surfaces. The concrete surface smoothed by the trowel is smoother than the manual, which can greatly improve the compactness and wear resistance, and the working efficiency is more 10 times than manual operation. Floor trowels can be widely used in high-standard workshops, warehouses, parking lots, squares, airports, etc.
When the machine starts to operate, first you should hold the joystick, start the gasoline engine, and the spatula starts to rotate for troweling the concrete road. When the trowel machine is working, you should be sure to stabilize the trowel and adjust the direction in time, prevent the machine from losing control. After the bottom grinding disc is roughing for any general uneven areas, removing the grinding disc and finely grinding with finish blades to meet your needs.
How to Choose An Right Electric Trowel?
A power trowel, walk-behind trowel, or ride on trowel machine, its main job is to create a level, smooth concrete surface for indoor and outdoor. Different jobs require different types of trowels.
If you want to use power trowel, you must understand the blade first. Its quality is directly related to the effect of smearing the concrete. The trowel spatula often rubs against the concrete surface, it will inevitably cause wear after a period time, so the blade should be replaced in time.
When we choose the blade, first look at the material. If the material is too soft, it will be easily deformed, which will cause unevenness. So we must choose those materials with high rigidity.
How To Operate the Power Trowel Correctly?
- Check whether the motor, electrical switch, cable and wiring are normal, and install the leakage protector.
- Clean the debris on the wiper to avoid the whole machine beating.
- Test the trowel perforce after turning on the power,and the blades should be rotatedin a clockwise direction and can’t be reversed.
- The operatorand assistantsshould wear insulated shoes and insulated gloves, prevent the cable insulation from being broken and an electric shock. The cable should be taken by the auxiliary personnel.
- If the machine encounter any problem, it must be shut down and cut off the power.
- The trowel machine should be stored in an dry andclean environment. The handle should be placed in the specified position and not be handled in a rough manner during transfer.
Regardless of the type of troweling machine, you should pay attention to these operational matters for ensuring construction safety and reducing wear and tear. The power trowel is used for faster construction and more convenient operation. The important thing is that the ground effect is more uniform, smooth and beautiful.
The power troweling machine is an important investment for any constructional engineering. Just send an enquire, YG machinery can help you make the right choice for your business.